Pocket Jet 3M Machines Paper HOME  2018UnimaxNYC


  11TH14 Repro FX Stencil Thermal Copy Paper

Thermal & By-Hand Stencil Paper

Original Authentic Spirit ReproFX Stencil Paper
 Made in USA
Thermal Stencil paper for 3M and PocketJet
#11TH14 8-1/2 x 11"  $33.49/Box of 100
#11TH15 8-1/2 x 11"  $5.00/Pack of 10 Sets
#11TH16 8-1/2 x 14" $39.90/Box of 100
#11TH17 8-1/2 x 14"  $6.00/Pack of 10 Set
 
Free Hand-Drawing Stencil Paper.
You might consider having some as spares just in case.
Use a hard ball point on a hard surface  and draw or trace directly on the white.
There is no "Yellow" Sheet.
#11TH25 8-1/2 x 11" HAND STENCIL  $33.99/Box of 100
#11TH26 8-1/2 x 11" HAND STENCIL   $5.00/Pack of 10

4-Part Stencil Paper for use with Thermal Copy Machine
See Pocket Jet for use with Stencil Pocket Jet.

1) Top White Paper. The white top layer will have the final image on its underside in reverse. Feed through the stencil machine with the white side up.
2) Thin Brown sheet. Protects purple coated layer during shipping and storage.
If you leave it in, the image will be on this thinner sheet. Take it out
and image is on underside of white top paper.
3) The "Purple" layer. This is not carbon but crystalline violet and caruba wax, non-toxic and safe for skin. The purple coating makes the image which is transferred to the back of the upper white sheet.
It will be in reverse so that when it is applied it is correct reading.
4) Bottom Yellow sheet. Holds everything together and provides grip when sending it through the thermal copy machine. 

For use "By Hand" 3-Part Stencil Paper without using Thermal Copier

1) The top layer is White.

This is the layer that will have the final image on its underside.
Draw directly or place artwork on top and copy lines pressing hard.
2) The "Purple" layer This is crystalline violet and caruba wax, non-toxic and safe for skin.
The purple coating creates the image which is transferred in reverse to the back of the upper white sheet.
4) The bottom sheet Holds everything in place.
Use a Carrier for Thermal 3M Machines
Not for use with Pocket Jet
Make a Better Stencil
#11TH18, $15.50 Ea
Blue or Clear does not affect
the quality of the finished stencil.

A carrier creates a more uniform squeeze through the rollers.

Insert the stencil set in the carrier
without the Yellow and without the onion skin
and feed through your Spirit Pocket Jet Printer machine.
Carrier Size 8-1/2" W x 14" Long
.
Just fits. Center carefully to feed.

4-Part Stencil Paper for use with Thermal Copy Machine

"By Hand" 3-Part Stencil Paper without using Thermal Copier

Unimax can repair 3M Copiers

3M Machines only can be sent or brought in to NY
with a $200.00 payment which will be
credited against repair cost with "OK to proceed" at quoted price.
Not refundable otherwise.
Machines sent or brought in to Unimax NYC and not claimed
after 120 days after repair or no contact
will be considered abandoned and disposed of at Unimax discretion.