ONE (1) complete turn Clockwise.
DO NOT over-tighten.
Hold the Needle with one hand
without moving it.
Screw the "jewelry" into >> the needle
not vice-versa. Do not rotate the needle part
onto the jewelry.
If you "hit bottom" or it
won't screw in any further
>> back off 1/4 turn counterclockwise.
The jewelry must be loose enough to easily
screw off without being loose enough to disconnect.
You must practice this before use.
because the needle must
be removable by unscrewing.
Remember...
you will need to unscrew the jewelry
Repeat:
don't over tighten.
Use Standard Ring Closing pliers
to hold the jewelry firm unless you can hold
the jewelry firmly with slipping.
Pierce firmly into the cork.
Practice before attempting these maneuvers.
Remember, the needle must be secure in the cork.
so that it doesn't come out of
the cork when you rotate the cork.