TOUR ORDER Piercing Tools Home Jewelry Index © 2001 Unimax

Back   NEXT

ONE-STEP PIERCING     Pierce and Insert in one motion.    Order # 13G-T      For Professional Use Only.

 

For Professional Use Only.

 


Practice these steps before using this technology.
 


Any attachments, such as balls, must be tight.
Tighten the ball with Ring Closing Pliers before piercing.

 
Screw the Jewelry into the end of the needle.
ONE (1) complete turn Clockwise.
DO NOT over-tighten.


Don't over tighten.

Hold the Needle with one hand without moving it.
Screw the "jewelry" into >> the needle not vice-versa.
(
Do not rotate the needle).

When you "hit bottom" or it won't screw in any further
Back off a "hair" so that you can unscrew the needle.
You must practice this before use.
Keep in mind that you will need to unscrew.

 


Use Standard Ring Closing pliers or your hand
to hold the jewelry firm without slipping
while you pierce.

Practice piercing firmly into the cork - VERY firmly.
Practice before attempting these maneuvers.

The needle must be secure and solid in the cork.

Practice before attempting these maneuvers.

Remember, the needle must be secure in the cork.

Practice holding the jewelry firmly.
Practice sticking the needle in the cork.

Practice piercing a card.
 

To Remove.
Hold the jewelry in one hand or
Continue Holding with the Pliers.

Rotate by the cork Counter clockwise to remove the needle.
Unscrew by the cork.

WARNING:
Do not unscrew an unprotected needle.

To Remove.
Hold the jewelry with the tool or with one hand.
Rotate the cork Counterclockwise.
Unscrew by holding the cork.

WARNING:
Do not unscrew an unprotected needle.
If the cork separates from the needle
withdraw the piercing needle. Abort the piercing.
WARNING:
DO NOT ATTEMPT TO PUT THE CORK BACK ON.
Remove the piercing jewelry and needle.
Practice before using.